How do I update my charging target?

You can set a charge target via the Charging page of the Ohme app by toggling this setting on.

To update the charging target, simply tap either the “Charge to” or “Charge to add” percentage and “Ready by” time and adjust them accordingly. In this example, we have set a target to ‘add’ 30% charge by 08:00am the next morning.

These settings will be applied to the next charging session, and will remain set unless they are either adjusted, or “Dynamic charging” is disabled.

If Dynamic charging is turned off, Ohme will default to a “Charge to full, ready as soon as possible” mode, in line with any other scheduling restrictions set.

For example, with Dynamic charging turned off, and a Price cap enabled, Ohme will schedule to add as much charge as possible during the off-peak hours of the tariff currently selected.

Similarly, if the Regulated charging hours setting is enabled, Ohme will add as much charge as possible outside of the 08:00am-11:00am and 04:00pm-10:00pm windows.

Upon plugin, you can adjust your charge target for this particular session via the Charging page.

Simply tap either the Charge to or Charge to add percentage or Ready by time to edit these settings.

Upon plugout, the last changes made to the charging schedule will be saved.

For example, if the charging plan was adjusted from Charge to 30% to Charge to 80% while plugged in, upon plugout, the Ohme app will save the schedule as Charge to 80% for the next session.

Routines are schedules you can set for specific times or days throughout the week. These can be set up via the Routines button at the bottom of the Charging screen.

Note: you will need to have Dynamic charging enabled in order to see Routines.

To set a Routine for the first time, tap the “Create a routine” button at the bottom of the screen.

You will then be able to name the routine, and choose the following information:

• Which days the routine is active

• Your charging amount and Ready by time

• Cabin Preconditioning (the default time is 30 minutes but this can be adjusted)

Once you have entered this information, tap Save in the top right-hand corner to finish.

To edit an existing Routine, simply tap the name of the Routine and adjust as needed. Then, click Save to confirm these changes.rnrnIf you need to delete a Routine, tap on the routine you wish to remove, and tap the Delete button at the bottom of the screen.

Once a routine has been enabled, before you plug in, you will see the name of the active Routine on the Charging screen above “Dynamic charging”.

In this example, we can see a Routine called ‘Overnight charge’ has been enabled.

Upon plugin, the name of the schedule will be visible on the charging screen.

If you wish to edit the charge target for this particular charging session, simply tap the Charge to/Charge to add or Ready By Time to update this information. The routine name will then update to “This session only” to confirm the changes.

Upon Plugout, the charging schedule will revert to the original rule that has been set in your Routine.

Upon plug in, the charging page will show the current charging plan.

Tap “Max charge”, then “Turn on Max charge” to activate this setting.

You should then see a pink banner at the top of the screen showing “Max charging” followed by the “Time until full” underneath.

If you want to revert back to a Smart charge, tap “Smart charge”, or unplug and plug back in, and Ohme will default back to your original settings.