Ohme Home/Go: Hoe weet ik wat mijn oplader doet?

1. Amps scheduled to be delivered upon plug-in. When a charge session has a scheduled delay, the display will show 0A.
2. Activity and connectivity status.
3. Internal temperature of the unit.
4. Total kWh charged and time elapsed in a session.
   QR code to link charger with Ohme app.
5. Real time kW being delivered to the car.
6. Mains voltage.
7. Real time amps being delivered to the car.

1. Charging
2. Checking server for firmware
3. Attempting to download new firmware
4. Connected to network but unable to send or receive data
5. Charging suspended due to vehicle communications error
6. Connection to network denied
7. Connected to server
8. Downloading new firmware
9. EV Supply Equipment (EVSE) connected, but not ready to charge
10. Fault
11. GPS has secured a location fix
12. Level 1 signal strength

13. Level 2 signal strength
14. Level 3 signal strength
15. Level 4 signal strength
16. Level 5 signal strength
17. New firmware will be installed on device, awaiting reboot
18. No network
19. No SIM
20. Not charging due to schedule
21. PIN number needed
22. PUK code needed
23. Ready to charge
24. Searching for network

1. Waiting, ready to plug into the vehicle.
   (Steady green light)
2. Plugged into vehicle, waiting to connect to vehicle.
   (Flashing green light)
3. Connected to vehicle, waiting for vehicle to accept charge.
   (Steady red light)
4. Waiting for schedule to start charging.
   (Lights flash in sequence)
5. Charging.
   (Steady red light, flashing green light)
6. Electrical fault.
   (Flashing yellow light)
7. EV fault.
   (Lights flash simultaneously)