Hoe installeer ik een CT-klem?

Once the Ohme Home Pro has been fixed to the wall, connect the data cable wires in the junction box.rnrnNote: It is important not to feed the cable through the top of the junction box to minimise the risk of water ingress.

Connect the other end of the data cable to the Wago light box (included with the Ohme Home Pro) and join with the wires from the CT clamp.

u003cp data-renderer-start-pos=u00222373u0022u003eAttach the CT clamp closest to the cable exiting the smart meter.u003c/pu003ernu003cp data-renderer-start-pos=u00222448u0022u003eOnce you have finished installing the CT clamp, you can use the Installer Portal or Installer Mode to check the clamp is reading data correctly.u003c/pu003e

Open up the Ohme ePod and attach one end of the data cable to the front piece of the unit using the spring loaded connections.

u003cp data-renderer-start-pos=u00229155u0022u003eOnce the first end is secured inside the unit, join the other end of the data cable to the CT clamp wired inside the Wago box.u003c/pu003e

Now the data cable and CT clamp wires are joined, attach the CT clamp closest to the cable exiting the smart meter.

u003cp data-renderer-start-pos=u00223063u0022u003eOnce you have finished installing the CT clamp, you can use the Installer Portal or Installer Mode to check the clamp is reading data correctly.u003c/pu003ernu003cp data-renderer-start-pos=u00223209u0022u003eu003cstrong data-renderer-mark=u0022trueu0022u003eTip: Sometimes the electricity usage can be too low to trigger a reading. Turning on an appliance such as a kettle or toaster can help to increase the electricity usage and confirm the CT clamp is connected successfully.u003c/strongu003eu003c/pu003e