How to check and reset the RCBO

The RCBO (Residual current Circuit Breaker with Overcurrent protection) is a crucial safety device in any electrical circuit, protecting against earth faults, overloads, and short circuits. If the RCBO has tripped, this guide will walk you through the steps to safely reset it and restore power to the charger.

Checking the RCBO

Power is OFF

u003cp data-renderer-start-pos=u00227043u0022u003eWhen the trip switch is fully down the power is OFF.u003c/pu003e

Power is ON

When the trip switch is fully up the power is ON.

Tripped

When the trip switch is floppy and won’t stay in the up position the RCBO has tripped and will require a reset.

Resetting the RCBO

Step 1

u003cp class=u0022p1u0022u003eTo reset the RCBO, press the switch u003cbu003edownu003c/bu003e using both parts of the switch.u003c/pu003e

Step 2

u003cp data-renderer-start-pos=u00227554u0022u003eFirmly press the switch down until you hear a ‘click’. This confirms the switch has been reset.u003c/pu003e

Step 3

Push both parts of the switch up into the ‘ON’ position. The switch should stay in place and power will be restored to the charger.rnrnNote: If the RCBO does not stay in the ‘ON’ position, this could indicate a wiring issue or a fault with the RCBO itself. In such cases, a qualified electrician should be contacted.rnrnu0026nbsp;

Cet article vous a-t-il été utile ?

Thanks for your feedback!

Sélectionnez votre localisation

Argentina

United Kingdom

Australia

Belgique

België

Deutschland

España

France

Ireland

Italia

Nederland

Portugal